NEW Janty Dura DC Cartomizer
Product Description
CARTOMIZERS DURA DUAL COIL - COLOR BLACK
General description:
As we all know, cartomizers are fantastic. So.. what if I were to tell you that these are TWICE as good? That’s right, not only one coil, but dual coil’s deliver the power needed for making your vaping sessions thoroughly enjoyable.
The throat hit is amazing, and the burnt taste is no longer - and the [liquid] capacity has also been increased.
As we get many questions about how to maintain and care for these dual coil cartomizers, we decided to put the info up here so you can go back and check in case you forgot!
Cleaning procedure/maintenance:
Remove silicon tip exposing filler inside
Use a soft, steady stream of water – let the cartomizer run under the water for a few seconds, then remove it – you will now see water coming out the bottom of the cartomizer
Repeat step 1-2, six times
Once done, put your lips to the opening of the cartomizer (where you would normally draw vapor from) and blow until you make all the remaining water come out from the bottom of the cartomizer
Repeat step 4 until it seems as dry as you can make it
Let it air dry for a day
Your cartomizer is now ready to be re-filled, and re-used
Technical Specification
Contains: 1x Dual Coil Cartomizers
Overall dimension: OD: 9.2mm ID: 8.7mm Height: 45mm
Color: Black
Type of threading: 510 external threading
Type of tip: Rubber black or Silica Gel - fits any existing 510 mouthpiece
Body composition
Body: Stainless
filling material: 2 coils; airlaid paper; fire-retardant cotton
Type of material used in coils: Nickel
Resistance (ohm): 1.5 ohms
Liquid capacity (ml): 1.5 ml
Can be used with: PG & VG liquids
Warranty eGo cartomizers are not covered by our Janty Warranty Program. Please check all eGo cartomizers upon receipt to ensure that they are in working order.
General description:
As we all know, cartomizers are fantastic. So.. what if I were to tell you that these are TWICE as good? That’s right, not only one coil, but dual coil’s deliver the power needed for making your vaping sessions thoroughly enjoyable.
The throat hit is amazing, and the burnt taste is no longer - and the [liquid] capacity has also been increased.
As we get many questions about how to maintain and care for these dual coil cartomizers, we decided to put the info up here so you can go back and check in case you forgot!
Cleaning procedure/maintenance:
Remove silicon tip exposing filler inside
Use a soft, steady stream of water – let the cartomizer run under the water for a few seconds, then remove it – you will now see water coming out the bottom of the cartomizer
Repeat step 1-2, six times
Once done, put your lips to the opening of the cartomizer (where you would normally draw vapor from) and blow until you make all the remaining water come out from the bottom of the cartomizer
Repeat step 4 until it seems as dry as you can make it
Let it air dry for a day
Your cartomizer is now ready to be re-filled, and re-used
Technical Specification
Contains: 1x Dual Coil Cartomizers
Overall dimension: OD: 9.2mm ID: 8.7mm Height: 45mm
Color: Black
Type of threading: 510 external threading
Type of tip: Rubber black or Silica Gel - fits any existing 510 mouthpiece
Body composition
Body: Stainless
filling material: 2 coils; airlaid paper; fire-retardant cotton
Type of material used in coils: Nickel
Resistance (ohm): 1.5 ohms
Liquid capacity (ml): 1.5 ml
Can be used with: PG & VG liquids
Warranty eGo cartomizers are not covered by our Janty Warranty Program. Please check all eGo cartomizers upon receipt to ensure that they are in working order.
