FILLING - PowerPal DCT Tube Tanks
Product Description
PowerPal DCT Tube Tanks - Filling
Fill DCT Tube Tank:
First remove the drip tip from the top of the cartomizer.
Pull the DC Tank Cartomizer down from the bottom of the tank, and leave it 3/4 of the way in.
Push down on one side, and angle your tank - fill it with liquid so that the liquid is filling the outside of the cartomizer (recommend 3/4 full).
After the tank is filled with eliquid, push the DC Tank Cartomizer back through the top.
Now fill your cartomizer with about 15-20 drops of liquid (let the liquid in the Cartomizer settle for a few min.), and then screw it on to your e-cig.
NOTE: Thicker liquids that have higher than 50% VG may have issues using the tank. Please note that this is still a Dual Coil Cartomizer @ 1.5 and not to be used with smaller batteries such as Dura/510/306/etc.
When refilling DO NOT pull from the tube itself, doing so could cause the tube to be removed from the bottom. Pull from the metal bottom and pull up.
Fill DCT Tube Tank:
First remove the drip tip from the top of the cartomizer.
Pull the DC Tank Cartomizer down from the bottom of the tank, and leave it 3/4 of the way in.
Push down on one side, and angle your tank - fill it with liquid so that the liquid is filling the outside of the cartomizer (recommend 3/4 full).
After the tank is filled with eliquid, push the DC Tank Cartomizer back through the top.
Now fill your cartomizer with about 15-20 drops of liquid (let the liquid in the Cartomizer settle for a few min.), and then screw it on to your e-cig.
NOTE: Thicker liquids that have higher than 50% VG may have issues using the tank. Please note that this is still a Dual Coil Cartomizer @ 1.5 and not to be used with smaller batteries such as Dura/510/306/etc.
When refilling DO NOT pull from the tube itself, doing so could cause the tube to be removed from the bottom. Pull from the metal bottom and pull up.
